WT700 (A) batching controller

Technical Parameters:

Dimensions:

Basic Features:

* Up to 8 scales can be configured;

* CPU uses a high-speed 32-bit ARM processor, AD uses the industry's highest 24-bit chip. Powerful calculation ability to ensure the accuracy of weighing and batching;

* Communication function, 1 network port, 2 serial communication interfaces; can connect PC and touch screen at the same time;

* Remote management and control can be achieved through the network;

6. Innovative features:

* Intelligent jog compensation scale and deduction scale algorithm, improve the accuracy of ingredients;

* Automatic fall compensation or free switch of fixed fall;

* The parameter setting is flexible and can be adapted to various system configurations; the lifting bucket, inclined belt, pneumatic hydraulic unloading concrete and other methods are freely set;

* All scales can be designed for precise measurement function;

* The oil pump automatically pumps oil; the car will ring automatically after the production is completed;

* Automatic peeling within the peeling limit, automatic determination of feeding when exceeding peeling limit;

* Automatic arch breaking and vibration function according to the set minimum flow;

* Alarm prompt and self-processing function for abnormal conditions;

* All actions can be operated from the upper software;

* The countdown time of the aggregate conveying time by the inclined belt and the unloading time of the storage hopper are convenient for on-site adjustment;

* The warehouse can be changed freely during the production process without stopping production, which greatly improves work efficiency;

* It can be perfectly connected to the ERP system of all manufacturers, which is convenient for enterprise management and upgrading;

* IO supports 40 channels of digital signal input and 40 channels of digital signal output, and each IO point has an indicator light to facilitate on-site troubleshooting;

* The scales can be switched freely to avoid damage to one of the scales and lead to inability to produce, minimizing customer losses;

* You can switch freely between input points and output points to avoid damage to one of the input and output points and stop production;

* The input voltage polarity is not required at the input point;

* Digital weighing is convenient and fast; can be zero point calibration or end point calibration alone;

* The star-delta conversion started by mixer, inclined belt, etc. can be completed inside the controller without the need for external delay components;

* The system empty scale test function can facilitate the debugging personnel to simulate production when the raw materials on site are not prepared, so as to quickly test whether the equipment is operating normally, which can greatly save the installation and debugging time;

* It can perfectly replace the control system of all other manufacturers, and the transformation can be completed and produced smoothly in only one day at the fastest;